How To Install Residential Metal Roofing?

A metal roof is more demanding as compared to other materials but because it lasts longer, it may have a lower cost in the long run as the cheaper materials may need to be replaced from time to time.

Moreover, even if the initial cost is higher compared with other materials, can be considered a good investment not only as it is durable roofing of the house but also because it minimizes your electricity bill by reflecting heat from the sun. You can also look for five-star metal siding in Chatham via online sources.

Image Source: Google

This is because the air conditioner need not work so hard during the summer to keep the temperature at a comfortable level. 

First of all, this installation guide will discuss some of the tools that you will require. These include a drill, tape measure, chalk line, roofing nails, ladder, hammer, metal roof screws, metal snips, tool belt, and wood screws. 

Preparing with the tools and techniques, reading the instructions provided by the manufacturer on how to install the product, you will have to measure the height of the roof and add a few inches for the kind of overhang that you prefer. 

Then you will have to prepare the roof by dismantling the old shingles. Because metal roofs are lightweight, you do not actually need to remove the old roof but this is advisable if you want a cleaner appearance. 

After this, you can lay down some roof felt or tar paper to serve as the base for your roof. The next step on how to install a metal roof is to place the edging that will go around the perimeter of the roof. 

As the final step in this is installation guide for residential metal roofing, you will put in the trim work after laying down all of the required shingles.